Dataprobe iBoot Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt sieciowy Dataprobe iBoot. Dataprobe iBoot 16 stron. Web enabled remote power control
Również dla Dataprobe iBoot: Podręcznik (20 strony)

Drukuj stronę
Dataprobe iBoot Instrukcja obsługi
iBoot

General Description

The iBoot is a network attached, IP addressed, Web Controlled
AC power switch. Anyone with a web browser can access iBoot
to perform power On, Off or Reboot (timed power shutdown).
iBoot is password protected for security.
iBoot uses international standard IEC320 Connections and is
selectable for 115VAC or 230VAC. iBoot handles circuits up to
12 Amps (10 Amps at 230VAC).
Uses for iBoot:
♦ Remote reboot of any device, routers, servers, kiosks, etc.
The device to be rebooted need not be network attached.
♦ Secure sensitive devices by keeping them powered off when
not in use. This prevents hackers from seeing them at all
times.
♦ Power down equipment when not needed for power savings
and to save on where and tear.
♦ Power up alert devices like sirens, lamps, messages; or
control environmental system like heaters, coolers pumps,
etc.
Inter- or
Intra- Net
PC with
Web Browser
Page 3
iBoot
Web Controlled
Power Switch
Uplink
Downlink
Pwr In
10/100
Ethernet
Pwr Out