DUYAR HYDROPHORE Instrukcja instalacji, konserwacji i obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja instalacji, konserwacji i obsługi dla Panel sterowania DUYAR HYDROPHORE. DUYAR HYDROPHORE 12 stron.
Drukuj stronę
INSTALLATION, MAINTENANCE and OPERATION GUIDE
Voltage Settings
High Volt=250V
The Voltage Settings menu appears. When we press
the
button once, the above screen appears.
The upper voltage text starts to flash. In this case, the
value can be changed with the help of the
keys. Press the
button and save the High Voltage
set, and the following screen appears automatically.
Voltage Settings
Low Volt=180V
When we press the Lower Voltage Setting
the Lower Voltage setting starts to flash, in this case
the
arrow keys, The value can be changed with
the help of Press the
and return to the menu page.
Current Settings
P.1 High =15.0A
In order to change the current settings, press the
button and the current settings appear. Press the
button. P.1 saves the upper current setting by setting,
and the following screen appears automatically.
Current Settings
P.1 Low =01.0A
When the Sub-Stream setting
the P.1 subtitle starts to flash. In this case, the value
can be changed with the help of the
keys. Press the
key, save the P.1 Sub stream set and
return to the menu page.
6. SETTINGS MENU
Press the
button to enter the menu.
arrow
button,
key, save the lower voltage set
button is pressed,
arrow
HYDROPHORE
CONTROL PANEL
History Fault
01= High Current
From the historical fault information settings menu,
with the help of the
information is highlighted, and by pressing the
down arrow button, the most recent fault of the device
always moves to the first place. A total of 20 records are
stored in memory.
Language Select
English
Language selection is pressed,
Language Selection is highlighted with the help of the
arrow button in the settings menu, and the menu
is entered by pressing the
language is selected with the help of the
keys and automatically saved by pressing the
Operating Time
P1=0h / 0S
P2=0h / 0S
Press the Working Hours
menu, use the
arrow key to scroll to the Working
Times. By pressing the
The operating time of the pumps is displayed in hours.
Enter Password
A password is required by the system to enter the
general settings. When the
a 4-digit password is requested. If the password is
incorrect, the system automatically discards it from the
menu. When the password is entered, the screen on
the next page appears.
button, the past fault
button is pressed,
button. The desired
arrow
key.
button, and in the settings
button, the menu is entered.
button is pressed,
5