AGRI-COVER Command-10 Instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pilot zdalnego sterowania AGRI-COVER Command-10. AGRI-COVER Command-10 17 stron.

Trouble Shooting Remote

Problem Issue:

3. Remote transmitter doesn't

work. None of the lights turn

on when remote is turned on.

4. Remote transmitter doesn't

work, batteries are good and

transmitter lights are working.

System operates with toggle

switch but not with (remote not

communicating with receiver.)

(Assuming Receiver is working properly)

Check or Try...

a. Check remote for dead batteries,

if batteries are dead replace with

new quality high capacity

batteries. Make sure batteries

are loaded correctly in remote

and terminals are clean. If

replacing batteries does not work,

problem may be in remote.

a. Make sure remote is set to

correct mode. If remote cannot be

set to correct mode,

reprogramming is needed

(see reprogramming portion of

instructions.)

b. Be sure to be within several feet

of receiver and try again. If

remote transmitter works at

short range by not long range,

replace batteries. If that doesn't

work problem may be in remote.