ausdom AD250 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kamery samochodowe ausdom AD250. ausdom AD250 18 stron. Fhd 1080p car dvr dash cam

Note: For the best field of view, it is better to mount the unit in the

middle of the windshield near the rear-view mirror.

Inserting the Memory Card

1. Before starting to record, you have to insert a Class 6 or above

micro SD card with up to 32GB capacity into the slot located on the

side of the unit. (Refer to Picture 5)

Memory Card

Picture 5

Picture 6

2. Press

button twice to enter Setup setting, press the

button to select "Format" item and press

button to format the

memory card. (Refer to Picture 6)

Note:

- Make sure the memory card has been formatted before using.

- Do not remove the memory card during recording.

- You have to insert the memory card into the camera before connecting

the camera to the power supply.

- For best results, use the format function of the car camera to prepare

your memory card.

3. To remove the memory card, push to eject memory card out of the slot.

1. Connect the small end of the power/transmission cable to the USB

connector located on the side of the unit.

2. Connect the other end of the power/transmission cable to the

included car charger. (Picture 7)

3. Plug the included car charger into the car's lighter socket. (Picture 8)

4. The unit will power on and start recording automatically after your

car engine is starting.

5. When the car engine is turned off, the unit will automatically power

off after saving the recordings.