ausdom AD282 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kamery samochodowe ausdom AD282. ausdom AD282 16 stron.

5.When the car engine is off, the unit will keep on recording for 15

seconds, and then automatically power off after saving the recordings.

Note:

-The unit can be recharged by connecting to the car's lighter socket,

PC or USB power supplier with the supplied cable. When the unit is

connected to the PC for charging, please power the unit off to avoid

any potential damage caused by high circuit.

-Before recording, the "Loop Recording" feature must be enabled

and the unit must be connected to the power supply.

Only use the supplied car charger with 5V output to charge the unit.

Non-compliant car charger will damage the unit and cause

malfunction.

Power the Unit On and Off

1.Power On: Press the power button located on the side of the unit for

2-3 seconds to power the unit on.

2.Power Off: Press and hold the power button located on the side of

the unit for 5 seconds to power the unit off.it will prompt "shutdown in

5 secs".

3.Auto Power Off: You have to enable the "Auto Power" feature in the

menu configurations to process power auto power off Setting. The unit

will automatically power off if no action is taken during the configured

time.

4.Screen light on or off: When powering on the unit, the factory

default the screen light on. then press once to turn off the light,press

once again to turn on the light.

Note: If the device ever 'crashes', you can press to the factory default

settings and reboot.

The unit provides you a battery indication appeared on the upper left

of the screen clearly so that you can understand the current battery

status. (Refer to Picture 9)

Picture 9

EN 7