4ms Company Listen IO Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt nagrywający 4ms Company Listen IO. 4ms Company Listen IO 4 stron.

Drukuj stronę

INS header

The

Listen Up

header has pins for the left channel (bottom pin), right channel (top pin), and ground (center

pin). The input impedance is 100k. Whatever signal is present on the header will be added to

the signal on the

Modular to Line Section

The bottom half of the

outputs are compatible, instrument-level equipment. There are two independent channels

which share a common

Mod In jacks

The two

modular signal into these jacks. These jacks are mono; if you have a stereo signal, patch the

left channel into the left jack and the right channel into the right jack.

Level knob

The

louder signal and converting it to a lower level signal is called attenuation). Although the

signal paths of the left and right channels are separate, this knob controls both channels. The

amount of attenuation can range from negative infinity (muted) to 0dB, which means the

signal level is not changed.

LED bar graph

The LED bar graph displays the level of the attenuated signal. The more lights that are on

and the brighter they are, the louder the signal. Unlike the top half of the module, the bottom

half will never cause clipping, and therefore there are no red lights.

Line/Headphones Out jacks

The two

be used as mono line level outputs or stereo headphone outputs.

If you're using these jacks with mono cables, then use the left jack as the output for the

attenuated signal of the left

signal of the right

If you're using these jacks with headphones, then both jacks will output both signals. The left

jack will output the left signal in the left ear and the right signal in the right ear. The right jack

swaps the left and right signals and outputs the left signal in the right ear and the right signal

in the left ear.

OUTS header

The

without the ability to drive headphones. This header can be used to connect to an adaptor

module such as the

The

ground (center pin). The output impedance is 1k, and the header can be used

simultaneously with the

INS

header of the top section can be used to connect to an adaptor module such as the

. This allows you to use a different size jack, such as 1/4" (6.35mm). The

Line In

jacks: both can be used simultaneously.

Listen IO

Level

Mod In

jacks are the inputs to the bottom half of the module. Typically, you'll patch a

Level

knob controls how much the

Line Out

jacks output the attenuated signal. These are multi-purpose jacks and can

Mod In

jack.

OUTS

header of the bottom section outputs the same signal as the

Listen Up

OUTS

header has pins for the left channel (bottom pin), right channel (top pin), and

Line Out

converts Eurorack signals to line or headphone level. The

knob.

Mod In

signal is attenuated (The process of taking a

jack, and the right jack as the output for the attenuated

for outputting with different size jack, such as 1/4" (6.35mm).

jacks.

Page

INS

Line Out

jacks,