4ms Company Mini PEG Podręcznik użytkownika - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Syntezator 4ms Company Mini PEG. 4ms Company Mini PEG 12 stron.
Drukuj stronęTable of Contents
................................................................................................................3
..................................................................................................................4
............................................................................................................4
................................................................................................................5
..............................................................................................................5
...............................................................................................................5
................................................................................................................5
...............................................................................................................5
..........................................................................................................6
EOF
..................................................................................................................6
..............................................................................................................8
Updating Firmware
Electrical and Mechanical Specifications ............................................................12
Setting up your Mini PEG
1. Power off your Eurorack system.
2. On the back of the Mini PEG you will see a 16-pin header. Connect one end
of the power cable to a 16-pin Eurorack power header on your power supply
distribution board and the other end to the Mini PEG with the red stripe on
the power cable oriented towards the bottom of the module.
3. Using the included screws, securely attach the Mini PEG to the rails of your
case.
4. Power on your Eurorack system.
Note: The Mini PEG is reverse-polarity protected, but incorrectly connecting any
module in any system can damage other modules on the power bus.
......................................................................................2
.....................................................................................................3
.......................................................................................................4
.........................................................................................7
.................................................................................8
...................................................................................................8
................................................................................................9
..........................................................................................9
.........................................................................10
.......................................................................................................10
...................................................................6
......................................................7
...........................................................7
................................................7
.............................................8
........................................................10
Page
2
of
12