ADE M301020 Series Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wagi ADE M301020 Series. ADE M301020 Series 16 stron. Electronic platform and handrail scales

Drukuj stronę

Menus structure of setting mode:

FILTER

SERIAL

Setting date and time

–

Enter the CLEAR key for approx. 4 sec; FILTER appears on the display.

–

Press key "6" six timed and TIME appears on the display.

–

Press ENTER key and SHOW appears on the display.

–

Press key "6" one time and HOUR appears on the display.

–

Press ENTER key and set the hours using the arrow keys "2", "4", "6" and "8".

–

Press the ENTER key and set the minutes and seconds.

–

Go back by pressing key "2"; TIME appears on the display.

–

Press key "6" one time and DATE appears on the display like the time entry.

–

Press key "2" two times and EXIT Y appears on the display.

–

Confirm with ENTER; date and time are set.

Weighing

Press the ON key for at least 3 seconds to turn the scales on. An automatic function test is carried out after

being switched on. This test is completed when the display shows zero. The scale is now ready to be loaded.

The weighing results can be read directly after a period of standstill at the display.

Resetting the scales back to zero

Wait until the standstill status indicator

cies after switching on the scale are being compensated. The zero key restarts the scale. The status indicator

(6) appears when the scale is being resetted.

Tare function

The TARE key (9) is used when the patient is being weighed with other items (e.g. clothing, shoes or other

items) which have to be ignored by the scale. To do this, weigh these items first. After the weight is displayed,

press the TARE key (9) to reset the display back to zero. The ADE-MAK changes to net mode (NET status

indicator (5) is on). The weight of the previously weighed and saved items is ignored when the patients' weight

is displayed. Enter the tare button again to get back to the normal weighing mode and remove any load from

the platform.

Entering manually tare - values:

Enter the appropriate tare value just by using the key pad under normal weighing mode. If the tare value has

been entered correctly, the value will be stored. Press the ENTER key (or TARE). The ADE-display is now

ready for weighing and changes to net mode [NET status indicator (5) is on]. Enter the tare button again to

leave this mode.

The manual tare value must be >0, the maximum value is limited by the weighing range.

PRESET TARA :

Press and hold the PRESET TARE key (10) [approx. 3 sec.], PRO PT X appears on the display. Select the

memory location (e.g. 2). Now enter the TARE VALUE which you would like to be tared off and confirm same

with ENTER. Enter the tare button again to leave this mode.

PROGR

PFORMT

SETPTS

(14) appears. By pressing the ZERO key (8), measuring inaccura-

TEST

TIME

Operation

DATE

VERS

M301020-01-210322-Rev005-UM-e