Datasheen D902AC Instrukcja szybkiej instalacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Router sieciowy Datasheen D902AC. Datasheen D902AC 9 stron. Adsl2/2+ usb 2.0 combo router

PASSWORD CONFIGURATION

When you configure ADSL MODEM through an Internet browser, the
system requires user name and password to validate access permission. The
factory sets the modem at a default username of "admin" and the password of
"password". The username is unchanged. You can enter the "password
configuration" on Configuration column to change the password.
Attention:
please remember the password after change, otherwise you will
not be able to change configuration after saving setting

USAGE OF USB INTERFACE

The Combo DSL Gateway is a device with both Ethernet Interface and
USB Interface, which is independent, you may use either of them to connect to
the different computers, in this way the two computers can connect to the
network at one time. The Gateway can be seen as a simple two-port HUB.
So, do not connect both the Ethernet Interface and USB Interface to a same
computer.
When using USB Interface, you must install the drivers.
installation, a virtual network card, "USB Remote NDIS Network Device", will
be added into the computer. It has all the functions of a real network card, and
it makes installation more easily.
Note:
The following shows the steps for Windows®2000, the installation,
configuration and uninstallation of Windows®98 or Windows®XP are
similar to this.
7
After