DV8 OFFROAD SPEC Series Instrukcja instalacji - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe DV8 OFFROAD SPEC Series. DV8 OFFROAD SPEC Series 10 stron. Rear bumper for 2018+ jeep jl wrangler
Również dla DV8 OFFROAD SPEC Series: Instrukcja instalacji produktu (10 strony), Instrukcja instalacji (12 strony), Instrukcja instalacji (9 strony)
Drukuj stronę
INSTALLATION
MANUAL
Begin by unpacking all items and inspecting
for missing pieces or damage. If you have any
concerns, please contact the company the
product was purchased from. Extra hardware
may be included with the product.
HARDWARE
INCLUDED
(20) M6x20 Allen
(1) Nutsert Tool
(2) M6x25 Allen
(26) M8x25 Allen
(20) M6 Nutserts
(52) M8 Flat Washers
(22) M6 Flat Washers
(26) M8 Split Washers
(4) M6 Serrated Nuts
(26) M8 Nutserts
FRONT INSTALL
STEP 8 |
Cut the front fender mount
off and grind it down so it is flush with
the vehicle. Paint is recommended on the
bare steel to prevent rust.
STEP 9 |
Hold up the fender to the
vehicle and note what holes will be used.
Install the provided nutserts using a
nutsert tool. If you do not own a nutsert
tool, we provide one with our kit.
For instructions on how to use the nutsert
tool, scroll to the last page.
Tip: Hold up the fender the vehicle as a guide to
determine which holes require a nutsert.
NEED HELP?
855-680-9595