4ms Company Spectral Multiband Resonator Podręcznik użytkownika - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Konwerter mediów 4ms Company Spectral Multiband Resonator. 4ms Company Spectral Multiband Resonator 16 stron. Eurorack module

Drukuj stronę

Advanced features:

•
Program your own scale:
°
The frequency of each of the 20 notes can be assigned by setting the octave, the semi-tone, and coarse and fine
micro-tone.
°
Up to 11 scales can be saved permanently in the user bank
•
Adjust color scheme of the lights:
°
Pick a pre-programmed color scheme or create your own using the sliders to set red/green/blue values.
°
Custom color schemes can be saved permanently
•
Save your settings in one of six Settings Slots.
°
Note position, scale and bank selection, Q value, lock settings and color scheme can be saved and recalled on the
fly.
°
On startup, the SMR loads settings from the last saved bank.
•
Optional alternative filter type
°
More exponential decay and different timbral qualities when plucked.
°
Freq jacks no longer track 1V/oct in this mode
•
Slider LEDs can be selected to display clipping and level, or just level
•
Firmware can be updated by playing encoded audio files from a computer into the SMR

Specifications

•
26 HP Eurorack format module
•
16-to-16pin eurorack power cable (included)
•
0.95" (24mm) maximum depth
•
Power consumption:
◦ +12V rail:
▪ 86mA max (jumper set to 5V)
▪ 110mA max (jumper set to 12V)
◦ -12V rail: 28mA max
◦ +5V rail:
▪ 25mA (jumper set to 5V)
▪ 0mA (not used when jumper set to 12V)
Jumper
VSEL jumper: +5V
Most modern modular power supplies provide power on the +5V rail. It's recommended to use the +5V rail when available. If
your system does not provide +5V, or if your +5V rail is noisy, the SMR can be set to generate an internal 5V from the +12V
rail by moving the jumper to +12V as shown above.
3
VSEL jumper: +12V