DVB ABBR-01 Instrukcja instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe DVB ABBR-01. DVB ABBR-01 18 stron. Adaptive cruise control relocation bracket 2021 ford bronco

Drukuj stronę

INSTALLATION

MANUAL

STEP

Remove the radiator fin structure by

removing the (2) 10mm bolts on each

side. When you pull the structure

away, unplug the (2) harness located

on the lower driver side. One plug has

an attached push pin mounted on the

structure, remove this as well using

your push pin tool.

STEP

Lay the structure face down on a soft

surface. On the top left side, we are

going to remove the top two fins.

These fins should not be attached to

the motor (mounted in the center of

the structure). Pry up on the linkage

closest to the edge of the structure.

You will release the top two fins from

the bottom one.

STEP

While the fins will not be reused, we

do not want to break them if this

was to ever be returned to stock. By

applying pressure in the center, we

were able to arc the fin enough to pull

one side out while prying on the side

with a flathead screwdriver.

Pry up to

remove

Pry out to

release

NEED HELP?

855-680-9595