Datatool DT202 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System bezpieczeństwa Datatool DT202. Datatool DT202 14 stron.

DT202 Operation Guide Revision 1 24-07-2023

3. Align the two casing halves and squeeze firmly to click the casing back together, ensuring the

joint is even around the perimeter.

Operating the DT202 Basic Functions

Arming (turning the DT202 on) and disarming (turning the DT202 off) are the most common

interactions and can be performed with a single button operation on the remote control.

1. Arm/Disarm button

2. Programming button

Arming the DT202

To manually arm the DT202 with the motorcycle ignition switched off press the Arm/ Disarm button

on the remote control once. The indicators will flash twice and if arm/disarm tones are enabled, a

double chirp will be heard.

The dedicated alarm LED in the motorcycle instruments will illuminate for 3 seconds and then

flash once every second for a further 10 seconds whilst the system initializes the tilt sensor and

trigger inputs. After 10 seconds, the DT202 is fully armed, and the motorcycle LED will flash at a

rate determined by the motorcycle battery voltage (see Battery Monitoring).

Disarming the Alarm

To disarm the DT202 press the Arm/ Disarm button once. The indicators on your motorcycle will

flash once to confirm the DT202 has disarmed and if the audible chirps are enabled, a single chirp

will be heard, if the alarm system has triggered during the armed state then the siren will sound a

chirp followed by a diagnostics sequence (see Diagnostics). The motorcycle ignition can now be

turned on without triggering the DT202 The DT202 cannot be re-armed within 3 seconds of

disarming. On disarming of the alarm system, if Automatic Rearming is enabled the alarm LED

will remain solid to indicate the this will occur.

With Passive Arming enabled there is no need to press the Arm/Disarm button to arm the DT202.

Once the motorcycle ignition is switched off the DT202 the alarm LED will illuminate solid to

indicate Passive Arming is enabled and the alarm system will fully arm after the chosen delay

period, which can be chosen by the user from 30 seconds or 1 minute. The indicators will flash

twice and if arm/disarm tones are enabled, a double chirp will be heard automatically arming.

If the Alarm Protection Switch is activated and remains activated once the alarm system arms the

directional indicators and the siren will sound at full volume.

Passive Arming is disabled by default.

Datatool is a brand of Scorpion Automotive Ltd

Scorpion House, Drumhead Road, Chorley North Business Park, Chorley, Lancashire, England. PR6 7DE

Tel: +44 (0) 1257 249928 E mail:

Web: http://www.datatool.co.uk