ADE M403020 Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wagi ADE M403020. ADE M403020 16 stron. Class iii approved scales electronic chair scales
Drukuj stronę
Replacing the rechargeable batteries
The battery compartment is located at the front of the unit.
1) Open the battery compartment.
2) Remove the battery cable and the corresponding connector carefully from the housing. Disconnect the
battery pack. Connect the wires/plug (red to red, black to black) with the new battery pack and insert
same into the housing.
3) Close the battery compartment.
Only use original rechargeable batteries and charger units from ADE. The warranty does not
cover any damage caused by using other types of batteries or charger units.
Tips for handling the batteries
The life of a battery depends essentially on the load, frequency of use, temperatures, settings and the acces-
sories used.
–
New batteries or batteries that have been stored for long periods require a longer charging period.
–
Charge the batteries at room temperature.
–
Store the batteries empty (uncharged) in a cool, dark and dry place.
–
Never expose the batteries to temperatures below -10°C (14°F) or above 45°C (113°F).
–
Over the course of time, batteries lose their charging capacity and require a recharging period. If the bat-
tery performance drops considerably, then it is time to replace the battery.
–
New batteries are supplied only in partial charged condition. Some batteries only achieve their full capaci-
ty after several complete charge and discharge cycles.
–
When disposing of disused batteries, observe the valid legal and municipal regulations.
Never dispose of batteries in fire as they can leak or explode!
Quality features
ADE products correspond to the applicable EC Directives and European standards to manufacture
and distribute world-wide medical devices as per the latest technical standards ensuring a long life
time and continuous reliability.
This symbol stands for compliance of the European Directive covering medical
devices and declares the conformity as per the Medical Device Law..
Approved scales classes III respecting the standards of the European guideline
covering approved scales are carrying this sign.
This symbol means: "Consult operating instructions". To achieve accurate results,
read the instructions for use carefully before use and follow all instructions provid-
ed therein. Keep the instructions for use for future reference.
Products carrying this symbol meet the requirements as per:
The valid EC Directive for non automatic scales
Using the scales for legal metrological applications
The scales are used in medical facilities for diagnostic and medicinal purposes as long as they are calibrated.
The scales must be recalibrated according to legal conditions and regulations.
4
in the latest version.
M403020-210322-Rev006-UM-e