Aussie Pumps AB Scud 30 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pompa wodna Aussie Pumps AB Scud 30. Aussie Pumps AB Scud 30 16 stron. Stainless steel frames, 3,000/4,000 psi
Również dla Aussie Pumps AB Scud 30: Instrukcja obsługi (16 strony)

Drukuj stronę
Feb 2019
SAFETY PRECAUTIONS - IMPORTANT
1.
NEVER direct the spray jet at any surface that
may contain asbestos material.
2.
NEVER direct the spray jet at any person or
animal. Keep hands and feet clear of the
cleaning nozzle at all times.
3.
NEVER hold a finger over the high pressure
nozzle.
4.
NEVER direct the spray jet at the machine itself
or any electrical equipment.
5.
After use, release the pressure in the high
pressure hose by operating the gun trigger.
6.
DO NOT attempt any mechanical repair. If you
have a problem with your machine contact your
local Aussie Eco Clean Service Division, phone
(02) 8865 3500.
7.
NEVER supply any liquid other than water to
the pump inlet.
8.
DO NOT run dry
9.
NEVER pull the high pressure hose if it has
formed kinks or nooses.
10.
NEVER pull the hose over sharp objects.
FRAME & WHEEL CARE ... MAINTAIN OPTIMUM PERFORMANCE
Aussie AB blasters now come fitted with
top quality flat free tyres.
To maintain tyre shape ...
1. Ensure that straps used to secure the
unit during transit are not over
tightened to the point where tyres
misshape.
2. Do not leave the unit strapped down
for extended periods.
Aussie AB Direct Drive Super Scud Series ... Operation & Maintenance Manual
11.
DO NOT attempt to disconnect any hose or
coupling with pressure still in the hose.
12.
DO NOT join hoses together to extend the
length (buy an extra long hose)
13.
DO NOT operate the machine whilst standing
on ladders, use a platform tower or scaffolding.
14.
DO NOT operate if there is a chance ice has
formed in the pump or hose. Thaw first.
15.
Operate in well ventilated areas only.
16.
DO NOT fill the fuel tank while engine is running
or hot
17.
DO NOT try to repair a leak in the hose or
connection while the system is under pressure.
18.
DO NOT substitute any component part on this
machine. Use of incorrect parts could cause
serious personal injury.
19.
Children must NOT be allowed to use the
machine.
20.
Always use safety goggles and steel cap boots
when using the machine.
Frame care
1.
Do not drop the unit; this could
cause frame distortion or damage
bearings.
2.
Do not lift using hose reel mounting
plate or handle. An optional lift bar
is available if required.
Aussie Pumps
5