DVDO DVDO-C3-1 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kamera bezpieczeństwa DVDO DVDO-C3-1. DVDO DVDO-C3-1 7 stron. Tracking function

DVDO-C3-1 Tracking Function Instructions

Set shield area (areas within the tracking area such as windows, doors, or TV that you don't want camera to

track) by clicking in [Shield] circle to bring up the current shield area. Click to checkmark one of the 8 boxes. Up

to 8 shield areas are supported. (Note: Shield areas are only needed if there is interference within tracking area.)

Camera Calibration for Tracking [Continued]

Configure basic parameters:

Tracking sensitivity: Set range of action and speed that

triggers subject tracking between 0~4. (Default value 2)

Fea distance: Distance between close-up camera and subject,

between 3.0~20.0. (Default 6 meters)

Pano distance: Distance between panoramic camera and

subject, between 3.0~20.0. (Default 6 meters)

Pan offset: Range between -200~+200 (steps), 0.069°/step.

Negative values calibrate left, positive values calibrate right.

(Default value 0)

Tilt offset: Range between -200~+200 (steps), 0.069°/step.

Negative calibrates down, positive calibrates up. (Default 0)

Click [Apply] for changes to take effect.

8. Navigate Key Action: Choose [PTZ mode] or [Menu mode].

Menu mode adjusts Pano camera OSD menu; PTZ mode allows

manual control of PTZ camera OSD menu.

9. Target Lost Action sets home position, where camera will return when

there is no movement or target is lost.

None action indicates camera will not return to home position

Pano (Preset 0) indicates camera will return to preset 0

Platform (Preset 1) indicates camera will return to preset 1

Timeout sets delay time after target is lost and camera returns to

home position. (Range: 0-15s, Default 3s)

DVDO

DVDOC3TRACK_V1.0