Aussie Pumps AB Scud 40 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pompa wodna Aussie Pumps AB Scud 40. Aussie Pumps AB Scud 40 16 stron. Stainless steel frames, 3,000/4,000 psi
Również dla Aussie Pumps AB Scud 40: Instrukcja obsługi (16 strony)

Drukuj stronę

Feb 2019

Before starting the machine

OPERATE IN WELL VENTILATED AREAS ONLY.

1. Ensure machine is level

2. Turn on water supply.

3. Pull gun trigger until water starts to flow in a

steady steam then release trigger.

Starting the engine

(refer to Honda engine manual for more details)

1. Ensure fuel valve is open

2. Move the choke on the engine to the closed

position . If engine is warm, move choke half-way.

3. Turn engine ON/OFF switch to ON

4. Hold the gun trigger on.

5. Start engine, pull the recoil starter grip lightly until

resistance is felt, then pull briskly.

Aussie Safety Protection Kit

Unloader - factory set,

DO NOT adjust

Detergent injector ...

attach poly tube with strainer

HP hose connection

Aussie AB Direct Drive Super Scud Series ... Operation & Maintenance Manual

UNLOADER SETTING

The high pressure unloader on the machine is factory set to

operate the pump at it's rated pressure.

DO NOT ADJUST. Tampering with the unloader will void

warranty and can be dangerous.

Throttle ... fully open

Choke ... closed position

Fuel value open

6. After engine starts, release the gun trigger and

slowly open the choke.

7. Warm up engine for 3 minutes without load.

Aussie Pumps

Safety valve

Thermal dump

Supply hose

connection