Aussie Pumps Eco-Clean TTL 1330 HYD Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Pompa wodna Aussie Pumps Eco-Clean TTL 1330 HYD. Aussie Pumps Eco-Clean TTL 1330 HYD 16 stron. Hydraulic drive high pressure blaster
Drukuj stronęASSEMBLY & PREPARATION FOR USE
If pressure drops off, check nozzle for
wear. Nozzles should be replaced on
a regular basis (every month for
machines in regular use, every 3
months
intermittently.
with the incorrect nozzle size or worn
nozzle will void warranty and can be
dangerous to the operator.
1.
Check the oil in the pump. With the machine on
a level surface the oil level should cover the red
dot in the oil level sight glass on the side of the
machine. If necessary, top up with SAE 30w 50
oil (non foaming type). Do not mix different
grades of oil as this may affect the machines
performance. If alternative oil is used, first
empty out oil by unscrewing drain plug in
bottom of machine.
2.
Ensure breather plug is fitted to pump (red/
black)
High pressure hose connection
Supply hose
(insert brass hose tail first)
8
Aussie Hydraulic Drive Blaster ... Operation & Maintenance Manual
for
machines
used
Using the machine
WARNING: Before operation ensure top
mounted oil filler plug is replaced by breather.
Failure to fit breather and keep clean can result
in over pressuring of oil chamber (crank case)
and can blow oil seals. This will void warranty.
3.
Check hydraulic fluid level. Refer to hydraulic
drive hand book.
HEAVY DUTY LANCE: To assemble insert lance into
gun and check nozzle has been fitted to other end of
lance
HIGH PRESSURE HOSE
Connect the high pressure hose to the threaded water
outlet on the side of the machine via a screw
coupling. No spanners are necessary.
Sept 2018