Aussie Pumps AB Scud 40 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Myjka ciśnieniowa Aussie Pumps AB Scud 40. Aussie Pumps AB Scud 40 16 stron. Stainless steel frames, 3,000/4,000 psi
Również dla Aussie Pumps AB Scud 40: Instrukcja obsługi (16 strony)
Drukuj stronęMarch 2018
Connect whip hose to high pressure outlet on
pump.
Fit handle to reel.
Fit gun to hose using C1500.24 nipple.
Start up machine (see below) and check for leaks.
All leaks must be rectified before using machine.
B.
Hose Connections
1. Connect high pressure hose to machine outlet (if
hose reel not fitted).
2. If optional low pressure downstream, in-line
chemical injector is to be used, connect the
injector tube to the detergent inlet and place the
Aussie Safety Protection Kit
Unloader - factory set,
DO NOT adjust
Detergent injector ...
attach poly tube with strainer
HP hose connection
Aussie AB Scud Cadet Series ... Operation & Maintenance Manual
UNLOADER SETTING
The high pressure unloader on the machine is factory set to operate the pump at
it's rated pressure. DO NOT ADJUST. Tampering with the unloader will void
warranty and can be dangerous.
other end of the tube, with the strainer attached,
in the chemical container (not supplied).
3. Connect gun/lance assembly to high pressure
hose.
4. Check inlet water filter is clean then connect
water supply hose to machine. Use a 25mm
(minimum) hose .
Incoming water supply must deliver double the flow
of the machine. If questionable, check supply at
machine. If supply is insufficient, do not operate
from this outlet. For residential use, the outlet
closest to the meter will usually deliver the highest
flow rate. Connect only to clean town water
supply.
Warning:
Do not operate from tank or pond. Doing so will
cavitate the pump causing damage. Cavitation or
pump starvation is not covered by warranty.
Cavitation is a phenomenon causing vacuum
pockets to form within the pump that eventually
implode under pressure pitting the internal pump
surfaces.
Aussie Pumps
Safety valve
Thermal dump
Supply hose
connection
5