ADE M600620 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wagi ADE M600620. ADE M600620 16 stron. Electronic bed scale

Drukuj stronę
ADE M600620 Instrukcja obsługi

Description

2
3
4
5
6
7
8
9
10
No. Name
1

Display

2
Battery charge level
3
Switching points 1 & 2
BMI status indicator
4
(HI, OK, LO)
5
Net status indicator
6
Status indicator
7
Hold – button
8
On/off, zero – button
9
Tare- button
10
Preset tare – button
11
BMI – Button
12
Units – Button
13
Number pad
Special function:
"0" key
"Enter" key
Standstill status indica-
14
tor (14)
:
15
"Hold"
16
"kg"
"g"

Connecting additional devices

Printer, PC or remote-display could be connected by the RS-232 interface. For connection of additional devices
kindly ask your local representative or authorized ADE dealer for further instructions.
6
Display
1
pic. 1-1 Indicator and operation panel
Description
LCD display for weight, mode, settings and configuration information.
Status of the battery charge level.
In program mode: Status indicator for switching points 1 & 2.
Status of the automatic BMI (Body Mass Index) evaluation.
LCD on - net weight is being displayed.
LCD off – gross weight is being displayed.
The scale is at zero level.
Activates the hold function.
On and off switch and re-set of the display.
Activate/ deactivate the tare function.
Press briefly to access the tare function.
Press for a long period to enter and save the tare value.
Enter to proceed with BMI mode.
Switch button between primary and secondary units. Not available for CE
approved class III scales
Figures 0-9, Clear, Enter and Navigation functions: Key 6 menu direction
to the right; Key 4 menu direction to the left; Key 8 menu direction down;
Key 2 menu direction up. For better understanding see Pic. 1.1 the blue
arrows. Used to navigate through menus, to select numerical values and
to increase or lower the value.
In weight mode, you can change between gross and net weight using fig-
ure "0" (if any weight have been tared off).
Function in weight mode: "Print" if printer has been connected.
The scale is at a standstill. The weight is stable with no movement. This
is mandatory for functions like reset, print and tare.
If displayed is the hold function is activated.
If displayed is the weight is displayed in kilograms.
If displayed is the weight is displayed in grams.
16
15
14
11
12
13
M600620-210422-Rev006-UM-e