Aussie Traveller 530 mm Instrukcja instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Okap wentylacyjny Aussie Traveller 530 mm. Aussie Traveller 530 mm 9 stron.

Step 5: Connect the wires to the 12Volt power source or wiring harness.

Ensure the wires are clear of the cavity and clear of any obstructions.

The red power wire represents positive "+", and the black power wire

represents negative "-".

Note：Reverse connection of the power cord will cause the rangehood

to malfunction.

Install the rangehood into the cut out cavity or on the wall with ST4.2×

13 cross tapping nail with pan head, as shown in Diagram 5.

Diagram 5