Datavideo DAC-200 Pierwsze kroki - Strona 9

Przeglądaj online lub pobierz pdf Pierwsze kroki dla Przełącznik Datavideo DAC-200. Datavideo DAC-200 13 stron. Important note to make dac-200 work with pinnacle dv500:
Również dla Datavideo DAC-200: Podręcznik referencyjny (1 strony), Instrukcja instalacji (16 strony), Ważne uwagi (9 strony)

Drukuj stronę
Datavideo DAC-200 Pierwsze kroki
C. Diagrams of typical cable connections
Make sure your VCR or Analog source is connected to the front inputs of the DAC-100 (LED's
are on the front of the DAC-100).
A 6-pin FireWire cable can be connected to the front or rear of the DAC-100. The
opposite end should be connected to your 1394/connector on your computer.
If you would like to monitor your video, a composite video cable can be used to connect a
video monitor. Connect a composite RCA cable from the rear of the DAC-100 and connect the
opposite end to the input of your monitor.
Note: S-video cables only carry a video signal, so you will need to connect your RCA audio
cables to the converter to capture sound.