DVIGear DVI-3210a Podręcznik użytkownika - Strona 8
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Konwerter mediów DVIGear DVI-3210a. DVIGear DVI-3210a 11 stron. Vga to dvi scaler/converter
Drukuj stronę5.2
Input set up
up, a secondary menu will show the following three (3) selections:
Clock
Phase
YPBPR
Clock:
Use this parameter to adjust for the optimal input clock frequency. (i.e.
where picture is stable and unskewed).
Pressing the + button narrows the width of the picture toward the left.
Pressing the - button extends the width of the picture toward the right.
Phase:
Use the + and- buttons to adjust for least amount of noise in the picture.
Input Select:
The DVI-3210a will automatically detect and display the input signal
format. You can also manually select the input format by selecting either the YPrPb
or RGB input mode.
For all menu items, use the + or – buttons to choose the parameter you want to
adjust, then press the Menu button to highlight your selection. Once a parameter is
highlighted, use the + or – buttons to increase or decrease the value of the setting.
Press Menu again to leave the setting and then move the arrow to the word "Exit".
Press Menu button again to exit the OSD.
5.3
Output set up –
sub-menu appears that allows you to select the output mode and resolution.
Selecting the DVI-D mode enables the digital output over the DVI-I connector.
Selecting the DVI-A mode enables the analog output. Use the OSD menu to
select the desired output resolution and then Press the menu key to save your
selection. Press the menu button to exit setup.
5.4
Output Adjustments When in DVI-D Mode:
Picture Adjust
– When the Picture Adjust Menu is selected, the following
adjustment parameters and default values will appear on the OSD:
Contrast
Bright
Color
Red
Green
Blue
Reset
Exit
– When you select the first item on the main menu, Input Set
RGB
When the Output Setup option is selected, a new
32/64
22/31
70
130
70
128
128
128
-6-