Datavideo TLM-170LM Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Monitor Datavideo TLM-170LM. Datavideo TLM-170LM 17 stron. 17.3” 3g-sdi tft lcd monitor

From time to time Datavideo may release new firmware to either add new features or to fix

reported bugs in the current TLM-170L firmware. Customers can update the firmware themselves

if they wish or they can contact their local dealer or reseller for assistance should they prefer this

method.

This page describes the firmware update process and it should take approximately 15 minutes

total time to complete.

As well as a working TLM-170L you will need:

 The latest firmware update for the TLM-170L monitor.

This firmware file can be obtained from your local Datavideo office or dealer.

 USB 2.0 pen drive 128MB or larger with a USB A connector.

Once started the update process should not be interrupted in any way as this could result in a

non-responsive unit.

How to update the firmware

1. Unzip / extract the supplied zipped archive or rar folder.

2. Wipe the contents of the USB 2.0 pen drive so it is empty.

3. Transfer / copy the unzipped / extracted file to the USB 2.0 pen drive; make sure the file name

is renamed to MSTFLASH.bin.

4. Plug the USB 2.0 pen drive into the USB 2.0 port labelled MAINTENANCE on the back of the

monitor.

5. Reboot TLM-170L and the update will be automatically in progress.

6. The TLM-170L Monitor will reboot itself at the end of the process.

Firmware update procedure