DVIGear DVI-3580a Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przełącznik DVIGear DVI-3580a. DVIGear DVI-3580a 8 stron. 4k multiviewer switcher, scaler
Również dla DVIGear DVI-3580a: Skrócona instrukcja obsługi (9 strony)
Drukuj stronę
Front Panel Layout
1. IR Receiver Window
2. Input Buttons
3. Audio Source Button
4. Window Position Buttons
1
9
10
Rear Panel Layout
9. 100~240 VAC Input
10. Master Power Switch
11. 7.1 Analog Audio Out
12. TOSLINK Audio Output
13. HDBaseT Output
14. HDMI Output
15. HDMI Inputs
4
Receives IR signals from the IR Remote Control.
Press buttons 1-7 to select the video or audio inputs. The indicators
show the status of the input selections.
Press this button and then press one of the input buttons (1-7) to select the
audio input. Use the Web GUI or RS-232 / IP commands for full control.
These buttons are used to assign video inputs to certain MultiViewer
window positions (see page 6).
2
11
13
Connect the included AC power cord to this receptacle.
Turns the device ON / OFF.
Connect to a multimedia system. See the User Manual for channel assignments.
Connect to the optical input port of an audio amplifier.
Connect to an HDBaseT device (e.g. DVI-7520-RX).
Connect to an HDMI display device.
Connect to the HDMI source devices.
3
12
14
See the warning on pg. 3.
4
15