Austere 5S-4KHD-5M Series Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kable i złącza Austere 5S-4KHD-5M Series. Austere 5S-4KHD-5M Series 3 stron.

Austere VII Series 8K HDMI Cables (1.5m and 2.5m lengths):

● These cables are Ultra High-Speed Certified and fully comply with or exceed the HDMI 2.1

specification.

● All 8K cables support speeds equal to or greater than 48Gbps.

● They are bi-directional and support Enhanced Audio Return Channel (eARC) for the most

advanced audio formats and highest audio quality.

● To use the eARC feature, you need a compatible eARC device, such as an 8K television or 7

and 9 channel soundbars.

● Refer to HDMI.org for all technical features supported by Ultra High-Speed Certified 8K

cables.

Product Registration

Prior to using your product, please go to

and to access our complete limited lifetime guarantee statement.

INSTALLATION

Installing your Cables

Prior to installation, be sure your device is off when connecting the cable.

1. Begin by plugging in one end of the HDMI cable to the source device first.

a. Be sure to note that the orientation of the cable matches the orientation of the

HDMI connector on your device.

2. Next, install the opposing end directly into the HDMI input port on the back/side of your

television.

Active Directional Cables

Austere HDMI cables that are 5.0m or longer in length are directional.

Follow these steps for installation:

1. Each connection end is clearly marked as "Source" and "TV."

2. Start by plugging in the end labeled "Source" directly into the source device, such as a

satellite box or receiver.

3. Then, install the end labeled "TV" directly into the HDMI input port on the back/side of

your television.

Technical Support: Please contact our technical support team with installation questions,

troubleshooting needs, or general product questions.

• Phone: 1-855-672-0684

• Email:

www.austere.com/guarantee

to register your product