Datavideo CCU-100J Instrukcja obsługi - Strona 18
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler Datavideo CCU-100J. Datavideo CCU-100J 20 stron. Camera control unit
Drukuj stronę3.5mm Jack x 1
10 Pin Jack x 1
Monitor Output
(SDI out, Tally, Power,
Port
Look Back, View Finder)
3.5mm Jack x 1
Volume Control x 1
Control Port
Camera Remote Control
Call Button x 1
External Tally Socket
Power LED x 1
Indicator
Camera remote control
link indicator
Bi-Color Tally LED
FW Upgrade
mini USB x 1
Power Switch
Off/8.4V/12V/16.8V
Tip: MIC
Ring1: Phone
Ring2: GND
Sleeve: Talk
PIN1: Power ground (P_GND)
PIN2: Signal ground (GND)
PIN3: Control signal for switching
between Look Back and View
Finder images (SW-LB/VF)
PIN4: Tally output (Green T_G)
PIN5: Tally output (Red T_R)
PIN6: CV image signal output (View
Finder CV_VF)
PIN7: CV image signal output (Look
Back CV_LB)
PIN8: Power output (OUT +8.4V/
12V/ 16.8V, Max:1 A)
PIN9: SDI output Signal
PIN10: SDI output ground (GND)
Connect to RMC-240
(Talk button and Look Back / View
Finder Switching)
SONY: 8 PIN
Panasonic: 10 PIN
JVC: 2.5 mm LANC Phone Jack / Multicore PS/2
Trigger audio transmission from headset 3.5mm jack back
to ITC-100
Transmission of tally information from AD-2 (S/P/J) to SLD-
1 SLED
Power Transmission Indicator
8.4V: Green Color
12V: Amber Color
16.8V: Red Color
Link: Blue Color
LIVE Channel: Red Color
CUED Channel: Green Color
Select power output level to camera
- 18 -
FOR YUGA AD-1
TALK
GND
MIC
PHONE
Front View of the
AD-2 Monitor
Connector