Datavideo RMC-180 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler Datavideo RMC-180. Datavideo RMC-180 19 stron. Ptz camera control unit
Również dla Datavideo RMC-180: Instrukcja obsługi (13 strony), Instrukcja obsługi (16 strony), Instrukcja obsługi (16 strony)
Drukuj stronę
The Datavideo RMC-180 Controller is capable of controlling up to 4 Datavideo Pan Tilt Zoom (PTZ)
cameras such as the PTC-150.
To get more value out of your equipment, please take a few minutes to read this manual
thoroughly. This will help you to familiarise yourself with all aspects of the RMC-180 PTZ Camera
Control Unit.
That's Datavideo; sharing the value!
1.1
Features
Remote control of up to four Pan, Tilt and Zoom cameras
•
Pan, Tilt and Zoom with speed control by joystick
•
Control of Pan, Tilt and Zoom as well as Iris, Focus, Gain, and other functions over Ethernet
•
Multiple presets for PTZ settings for each individual camera
•
Full remote control of each camera via serial communication over affordable network
•
cabling
Compatible with Datavideo's switcher tally indicators
•
Compact design for easy installation
•
Easy integration with Datavideo HD switchers for an affordable multi-camera solution.
•
1.2
Compatible Control Standards
Depending on your chosen PTZ camera(s) the following control standards are available.
• SONY VISCA
Please note that a firmware update may be required to switch your RMC-180 to the same protocol
as the camera you wish to control. All units are initially supplied with the VISCA protocol as this
works with the Datavideo PTC-150 camera.
1. Introduction
5