Datavideo TP-300 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Profesjonalne akcesoria wideo Datavideo TP-300. Datavideo TP-300 18 stron. Tablet

PROMPTER KIT FOR TABLET

10. Pull the draw cord to secure the black camera Snood /

Hood around the camera lens and to shut out light from

camera side.

11. Fit the adjustable mounting bracket, item E, to the

Prompter Frame just below the Glass Frame using the

mounting bracket screw, item D, and the recess in the

Prompter Frame.

Please be careful, do not over tighten

the mounting bracket screw.

12. Turn on the tablet being used and launch the

DV Prompter software. Prepare the prompting text to be

used. Then set up for the chosen optional remote

control. See the section regarding the supplied remote

control

(Optional Bluetooth Teleprompter Remote

Control) or separate remote and DV Prompter manual.

13. Put the configured tablet into the mounting bracket and

ensure it is held securely by adjusting the size of the

bracket holders for a snug fit and locking them in place.

Use the locking lever on the bottom of item E.

14. Adjust the prompting settings where necessary.

15. Adjust the camera exposure settings as necessary. See

Camera Exposure.

16. Read the section regarding the supplied remote control

(Optional Bluetooth Teleprompter Remote

TP-300

Control).