Datawell BV Waverider WR-SG Instrukcja instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wyposażenie morskie Datawell BV Waverider WR-SG. Datawell BV Waverider WR-SG 13 stron.

Display systems

Computer D1 The computer displays the data of Buoy 1, Buoy 2, Buoy 3, Buoy 4. On

this computer the following parts of the Waves4 suite are installed:

•

Waves4

Computer D2 The computer displays the data of Buoy 1, Buoy 2, Buoy 3, Buoy 4. This

system is also used by the operator of the Waves4 suite. This user configures the

settings of the campaigns in buoyd and waved. On this computer the following parts

of the Waves4 suite are installed:

•

Waves4 configurator

•

Waves4

Computer D3 The computer displays the data of Buoy 1, Buoy 2, Buoy 3, Buoy 4. On

this computer the following parts of the Waves4 suite are installed:

•

Waves4

In this example the HF-receivers are received with two systems. It is also possible to receive

them on a single computer system with one buoyd service running. This depends on whether the

RX-C4 receivers are at one or multiple physical locations. (With Ethernet it is possible to place

the acquisition system at a different location as the RX-C4 receiver, but in case of network

issues data will be lost.)

The system running the waved service is a separate server, it is also possible to put this on an

acquisition machine. It would also be possible to install the Waves4-configurator on this

machine.

For further information, please consult the Waves4 user and operator manual:

http://www.datawell.nl/Support/Documentation/Manuals.aspx