Cooke Glass Wind Guard Instrukcje

Przeglądaj online lub pobierz pdf Instrukcje dla Akcesoria do kominków Cooke Glass Wind Guard. Cooke Glass Wind Guard 4 stron.

• Clean glass with water, white vinegar, or commercially available streak-free glass

cleaner and a soft cloth.

•

Never place your wind guard directly on the fire pit insert.

•

Periodically check the set screws to ensure tight.

•

Always check the glass panels for cracks. DO NOT use glass panels with a crack.

•

Make sure the glass has a minimum clearance of 1" around fire pit opening.

•

Do not use in high wind conditions

• Never attempt to clean glass while hot.

• DO NOT touch glass while in operation or for 10 minutes following use. It will be hot!

• For a permanent installation, outdoor-rated silicone adhesive can be used to affix Glass

Guard to a fire pit surface.

• Avoid thermal shock breakage, rapid temperature change may cause glass to break

• Not to be used on fire pits with flames exceeding 6" above top of glass

COOKE Furniture extends the following warranty for COOKE glass guards used in the United

States of America. Dealers and employees of COOKE Furniture have no authority to make any

warranty or authorize any remedies in addition to or inconsistent with the terms of this

Glass Wind Guard Instructions

Care and Operating Instructions

COOKE Glass Guards Limited Warranty