Agri-Fab 45-0260 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt do trawników i ogrodów Agri-Fab 45-0260. Agri-Fab 45-0260 16 stron. 42 heavy duty lawnsweeper

Drukuj stronę

7. Assemble the bag retainer and the bag frame strap to

the front edge of the bag bottom. Place the bag retainer

on top and the bag frame strap underneath the bag bot-

tom. Fasten retainer and strap together using six #10 x

5/8" slotted screws and #10-32 hex lock nuts. See ﬁ gure

12.

FRONT EDGE OF BAG BOTTOM

#10-32 x 5/8" SCREW

BAG RETAINER

FIGURE 12

8. Assemble the frame strap to the lower hopper tube us-

ing two 1/4" x 1-1/4" hex bolts and 1/4" hex lock nuts.

See ﬁ gure 13.

1/4" HEX

LOCK NUT

FRAME STRAP

FIGURE 13

9. Secure the bag corners over the lower hopper tube by

snapping the ﬂ ap to the bag bottom on both sides. See

ﬁ gure 14.

FIGURE 14

FRAME STRAP

#10-32 HEX

LOCK NUT

LOWER

HOPPER

TUBE

1/4" x 1-1/4" HEX BOLT

(OUTSIDE)

SNAP

FLAP

IMPORTANT:

Do not over bend the support rods during

the following step. Over bending will cause the spring steel

rods to loose supporting tension.

10. Assemble the two hopper support rods as shown in

ﬁ gure 15. Place end of rod into hole in upper hopper

tube and bend rod just enough to ﬁ t bottom end of rod

into hole in bottom hopper tube.

FIGURE 15

11. Locate (by touch) the hole in each upper hopper tube.

Pierce holes through the stitched bag ﬂ aps, aligned with

the located holes in both hopper tubes. See ﬁ gure 16.

UPPER HOPPER TUBE

FIGURE 16

12. Assemble a vinyl cap onto each bag arm tube as shown

in ﬁ gure 17.

VINYL CAP

FIGURE 17

SUPPORT RODS