CooKing SVIF-CK3.0 Podręcznik techniczny - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik techniczny dla Hob CooKing SVIF-CK3.0. CooKing SVIF-CK3.0 11 stron. Induction cooker
Również dla CooKing SVIF-CK3.0: Instrukcja obsługi (18 strony), Instrukcja obsługi (13 strony), Podręcznik techniczny (10 strony)
Drukuj stronęIn addition to the fixing bracket for the remote control (included in the Cooking Surface Prime pack) there is also a
retractable system as shown. Can be installed anywhere; if installed in the kitchen top, remember to observe a minimum
distance of 40 cm.
You can order a remote control cable of various lengths up to 4 m.
Machining operations (cutting and drilling)
Important information to send to the fitter:
•
All edges must be chamfered, including sides that will be against a wall.
•
Do not make holes in the top at distances of less than 40 cm from the position in which the induction system is to be installed.
•
On request of the fitter, the company can send Autocad files that can be used to create markings showing the position of the
inductors on the kitchen top surface. In any case, the instruction manual available from the website www cooking surface.it
in the download area contains the dimensioned technical drawing exactly as shown in the following illustration.
•
The markings showing the position of the Cooking Surface can be made with manual tools, NC machines, or by sandblasting
with adhesive templates.
PDF_Dima Fuochi Cooking Surface Prime 3.0
DWG_Dima Fuochi Cooking Surface Prime 3.0
NOTE: To facilitate installation of the Cooking Surface appliance, mark the perimeter where the Cooking Surface will be installed in the part
under the kitchen top, in correspondence with the zones marked on the upper surface of the kitchen top.
100 mm
127 mm