Austlift 915510 Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria do kamer Austlift 915510. Austlift 915510 8 stron. Tripod double head

Drukuj stronę

WARNING:

•

Inspection: Visually inspect the system before each use to ensure that it is

in a serviceable condition and is operating correctly. If during inspection,

doubts are raised about the safety of the system or a component, these

should be replaced either by the manufacturer or a competent person.

•

Compatibility: To optimize protection, in some instances it may be necessary

to use the tripod with suitable boots/gloves/helmet/hearing protection. In

this case, before carrying out the risk-related activity, consult your supplier

to ensure that all your protective products are compatible and suitable for

your application.

•

Storage And Transport: When not in use, store the tripod in a well-ventilated

area away from heavily acidic or basic environment. Never place heavy

items on top of it. Also ensure that the tripod is stored away from chemically

hazardous environment. Preferably storage should be in a dry environment.

•

Repair: If the product becomes damaged, it will NOT provide the optimum

level of protection, and therefore should be immediately either replaced or

repaired. Never use the damaged product. Repair is permitted, provided

that it is either done by the manufacturer or a competent repair centre or

individual approved by the manufacturer.

•

Cleaning: In case of minor soiling, wipe the tripod with cotton cloth or a soft

brush. Do not use any abrasive material. For intensive cleaning wash the

tripod in water at a temperature between 30°C to 60°C by using a neutral

detergent (pH 7). The washing temperature should not exceed 60°C. Do not

use acidic or basic detergents.

•

Withdrawal From Use: If the system has been used to arrest a fall, it should

be removed from service and returned to the manufacturer or a competent

repair centre for servicing and re testing.

PERIODIC EXAMINATION:

•

It is important to conduct regular periodic examination of the product

because the safety of the user depends upon the continued efficiency &

durability of the product.

•

The frequency of examination should be at least once in a year however it

can be more than once if legislation requires, or frequency of use is high or

environmental conditions have an adverse effect on it eg excessive rain, sea

side environment, excessive heat etc.

•

It is emphasized that the examination be conducted only by a competent

personand strictly in accordance with the manufacturer's periodic

examination procedures.

•

It is also advised that the competent person be duly trained and authorized

by the manufacturer.

•

Ensure that all markings on the product are legible and can be clearly read.

•

It is the responsibility of the user to keep the below record card updated by

entering the details mentioned in it.

•

User is advised to keep the User Instructions document for the life of product.

1300 100 120

AUSTLIFT TRIPOD DOUBLE HEAD