AUSTRALIAN MONITOR ES Series Instrukcja obsługi - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikser AUSTRALIAN MONITOR ES Series. AUSTRALIAN MONITOR ES Series 17 stron. Rackmount mixer
Również dla AUSTRALIAN MONITOR ES Series: Instrukcja instalacji i obsługi (13 strony)
Drukuj stronęSPECIFICATIONS
TOPOLOGY
CHANNELS
POWER OUTPUT
4Ω
100V
CONTINUOUS POWER RATING
MAXIMUM OUTPUT VOLTAGE
SYSTEM GAIN
FREQUENCY RESPONSE 4Ω
FREQUENCY RESPONSE 100V
SIGNAL TO NOISE RATIO
THD+N. 1kHz
THD+N. 4Ω. FREQ BAND
THD+N. 100V. FREQ BAND
DC OUTPUT OFFSET
SENSITIVITY
AUDIO INPUT SENSITIVITY
AUDIO INPUT MAX LEVEL
RECORD OUTPUT
LINE OUTPUT
PHANTOM POWER
INPUT/OUTPUTS
AUDIO INPUT
RECORD OUTPUT
LINE OUTPUT
SPEAKER OUTPUT
14
ES SERIES INSTALLATION AND OPERATION MANUAL
ES60
ES120
Class-AB
65W
62W
30W
16.12Vrms
22.8Vrms
39.7dB (Line),
42.7dB (Line),
82.2dB (MIC)
85.2dB (MIC)
40Hz ~ 20kHz
30Hz ~ 20kHz
65Hz ~ 19.5kHz
55Hz ~ 20kHz
>82dBr
>85dBr
0.2%
0.2% (40Hz ~ 20kHz)
0.2% (30Hz ~ 20kHz)
0.2% (40Hz ~ 20kHz)
0.2% (40Hz ~ 20kHz)
< 50mV
160mVrms (Line), 1.2mVrms (MIC)
16Vrms (Line), 115mVrms (MIC)
220mV
760mV
12VDC @ 15mA per input pin
MIC - Balanced XLR per channel
LINE - Unbalanced stereo RCA per channel
Unbalanced Stereo RCA
Balanced XLR
6 pin Screw Terminal per channel
ES250
Class-B
1
130W
285W
120W
290W
60W
125W
33.76Vrms
45.9dB (Line),
88.4dB (MIC)
40Hz ~ 20kHz
40Hz ~ 20kHz
>80dBr
0.2%
0.3%
0.4% (40Hz ~ 20kHz)
0.65% (40Hz ~ 20kHz)
N/A
1kHz. 1%THD. -10W/+10W
1kHz. 1%THD. -10W/+10W
240Vac, 40C Ambient
4Ω Output, 230Vac
3dB below clipping, +0/-3dB.±5Hz
3dB below clipping, +0/-3dB.±5Hz
Low Frequency ±2kHz High
Frequency
All pots centre, Max Output, 1kHz,
20kHz BW, A-Weighted
3dB below clipping, 1kHz. 20kHz
BW, Unity Gain, A-Weighted,
Inputs at centre posistion
3dB below clipping, Freq
Band. 20kHz BW, Unity Gain,
A-Weighted, Inputs at centre
position
3dB below clipping, Freq
Band. 20kHz BW, Unity Gain,
A-Weighted
4Ω Output
Rated Power, 100V Output
10kΩ Termination.
1kΩ Balance Termination.
Measured across hot and cold