AUSTRALIAN MONITOR TX8201 - BROCHURE 1 Broszura - Strona 2
Przeglądaj online lub pobierz pdf Broszura dla Mikser AUSTRALIAN MONITOR TX8201 - BROCHURE 1. AUSTRALIAN MONITOR TX8201 - BROCHURE 1 2 stron. 8 channel stereo mic/line mixer with direct outputs
Drukuj stronęEngineered and Distributed By AUDIO TELEX COMMUNICATIONS PTY LTD (
NSW Tel: (02) 9647 1411 Fax: (02) 9648 3698 VIC Tel: (03) 9890 7477 Fax: (03) 9890 7977 QLD Tel: (07) 3852 1312 Fax: (07) 3252 1237 WA Tel: (08) 9228 4222 Fax: (08) 9228 4233
TAS Tel: (03) 6228 6373 Fax: (03) 6278 1063 SA Tel: (08) 8352 4444 Fax: (08) 8352 4488 Export Enquiries: [email protected]
Frequency Response
Total Harmonic Distortion
Signal To Noise Ratio
Tone Controls
Bass @ 100Hz - Boost +12dB, Cut -12dB; Treble @ 10kHz - Boost +10dB, Cut -10dB
Inputs
6 active balanced mic/line inputs with 3 pin XLR female sockets (200 - 600 Ohms).
Maximum Input Level is 500mV. 2 Stereo Line inputs with dual female
Input Sensitivity
Phantom Power
Outputs
Left & Right Master Outputs, 3 pin XLR male sockets. (1.5V @ 600 Ohms.)
Maximum Output Level: +20dB Stereo Headphone Output, 1/4" stereo socket.
(3.5V @ 600 Ohms) Stereo Tape Output, dual female RCA connectors.
(400mV @ 10K Ohms). Six direct line level outputs (600mV @ 10K Ohms)
Controls
Level Control per channel, Recessed Treble, Bass and Pan Controls per channel,
Indicators
Power "on" orange LED, 7 segment LED meters for both L and R outputs
Power Source
Power Consumption
Dimensions/Weight
ARCHITECTURAL AND ENGINEERING SPECIFICATIONS
The mixer shall have 6 balanced mic/line inputs and 2 stereo line inputs. The mic/line channels shall be
balanced and feature 3 pin female XLR sockets. The stereo line channels shall have dual female RCA
sockets. Each channel shall include tamper resistant treble, bass, and pan controls. The first six chan-
nels feature a line level direct output which can be used to feed additional amplifiers, mixers or record-
ing devices. An internal jumper shall allow the first six inputs to be removed from the master left/right
outputs whilst still retaining their direct output function. The equalisation per channel shall provide
12dB cut or boost at 100Hz and 10dB cut or boost at 10kHz. The master section shall include individ-
ual level controls for both the Left and Right outputs and shall also include two 7 segment output level
LED meters. The master outputs shall be balanced 3 pin XLR male sockets, and dual RCA female sock-
ets for the stereo tape output. A 1/4" stereo headphone socket shall be included for monitoring. The
mixer shall include muting card, as well as a 4 tone generator.
The mixer shall be of high quality, suitable for both live and commercial applications. It should have
ample headroom and a frequency response of no less than 50Hz - 15kHz (±3dB). Total Harmonic dis-
tortion shall be no more than 0.1% at 1kHz. The S/N ratio shall be -74dBV or better. Phantom Power
of no less than 15V DC shall be available on all microphone inputs. An internal switch to disable the
phantom power on any of the mic/line channels shall also be included. The unit shall be packaged in a
rugged 1 RU metal chassis suitable for desk or rack mounting.
The mixer shall be an Australian Monitor Installation Series model TX8201.
), 149 Beaconsfield Street, Silverwater, Sydney, NSW, 2128 Australia
ABN 78 001 345 482
-74dBV (all channels at centre position)
RCAs (47K Ohms). Maximum Input Level is 1.5V.
Mic: 1mV @ 200 Ohms; Line 1 - 6: 150mV - 1V @ 47K Ohms;
15V DC on all mic channels (switchable)
Left and Right Master Level Controls
AC: 240V - 50Hz or 110V - 60Hz (special order) 3 pin IEC connector
44mm H x 482mm W x 250mm D (Chassis dimensions only). 4kg
Website: www.australianmonitor.com.au
50Hz - 15kHz (± 3dB)
Less than 0.1% @ 1kHz
Line 7 - 8: 125mV @ 47K Ohms
7 Watts