Austro Flamm FLOK 2.0 Instrukcje użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Piec na drewno Austro Flamm FLOK 2.0. Austro Flamm FLOK 2.0 20 stron.

english
Heating in-between seasons
If you heat the stove in between seasons, when the
outside temperatures are higher, the flue gases may not
be able to escape completely and this may lead to
disturbances in the chimney draught, especially if the
temperatures are rising suddenly. The stove has to be
charged with less wood then and the primary air has to be
increased so that the wood can burn down faster (with
visible flames) and thus the chimney draught can stabilize.
4. THE MOST IMPORTANT SPARES—OVERVIEW
Gaskets
Description
Flat gasket 8x2 mm (1,7 m)
Gasket round Ø= 8 mm (0,5 m)
Gasket round Ø= 14 mm (1,8 m)
Keramott
Description
Bottom left, Keramott
Bottom right, Keramott
Wood retainer, Keramott
Rear, Keramott
Side component left, Keramott
Side component right, Keramott
Baffle plate, Keramott
Grate
Other parts
Description
Flok 2.0 door
Door handle
Flok BA1 door spring
Flok door glass
Glass cleaner ½ litre
Stove lacquer
Accessories
You can obtain floor plates of glass or steel, care products or the Heat Memory System for heat storage from your
certified dealer.
IMPORTANT:
Have defective parts replaced by your certified dealer. This will guarantee that your stove functions
properly and safely.
The fireplae must not be attered.
Maintenance
To clean the glass, please use a specialised product such as Thermohit glass cleaner. Lacquered surfaces are to be
cleaned only with a cloth (may be damp). Special cleaning agents should also be used for stainless steel surfaces.
Only gaskets in good order ensure the proper function of your stove !
Cleaning
The stove, flue outlets and smoke pipes should be cleaned and inspected for deposits every year – if necessary more
often, e.g. after the cleaning of the chimney. The chimney also has to be cleaned regularly by the chimneysweeper.
Your chimneysweeper will inform you of the necessary inspection intervals. An expert should inspect the stove
annually.
Nr.drawing Part number
13
710096
14
710696
15
714223
Nr.drawing Part number
1
714930
2
714931
3
714932
4
714933
5
714934
6
714935
7
714336
8
716408
Nr.drawing Part number
9
720005-29
10
720016
11
714990-15
12
714920
--
640070
--
650002
7
Chimney fire
A chimney fire may occur, due to sooting and deposits in the
chimney, if impropes or humid fuel is used. In case of a
chimney fire close all air inlets on the fireplace/chimney
immediately and call the fire brigade. Please have an expert
inspect your chimney for cracks and air-tightness after the
burning out of the chimney.
Keramott numbering = installation instructions!
Flok 2.0