Bresser BR-600BM Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt oświetleniowy Bresser BR-600BM. Bresser BR-600BM 13 stron. Led panel light
Drukuj stronę
➊
A
➍
➎
➐
➒
⓫
⓭
Fig. 1
DELIVERY CONTENT (FIG. 1)
LED Light (A), remote control (B), power adapter (C), power
cable (D)
PARTS OVERVIEW
➊ Vents
➋ 2.4G Antenna
➌ LED display
➍ Locking knob (tilt joint)
➎ Battery holder
➏ Power connection socket
➐ Channel button
- Press the "CHANNEL" button and turn the available
adjustment knob to adjust the channel
- Press the "CHANNEL" key to confirm.
➑ Power button
➒ Battery check button
In situations where only fitted battery, press the
"BATTERY" key, can check the Battery electricity
➓ Adjustment knob
- Enter Full Power Mode
• Press the "DIMMER/COLOR" button two times to enter
Full Power Mode (4400k COLOR temperature)
- Adjust brightness
• Turn the knob to adjust the brightness 10 ~ 99%
⓫ U-bracket
⓬ Fixing screw (tripod connection)
⓭ Tripod connection
REMOTE CONTROL (B)
LCD
Power button
– button
Menu button
+ button
Battery compartment
➋
➌
➏
➑
➓
⓬
⓴
D
POWER ADAPTER (C) AND CABLE (D)
C13 socket
Barrel connector
Euro plug
C13 plug
ESTABLISHING THE POWER SUPPLY
1. Insert the barrel connector (16) of the power adapter (B)
into the power connection socket (6) on the LED light.
2. Insert the C13 plug (17) of the power cable (C) into the C13
socket (14) of the power adapter (B).
3. Insert the Euro plug (15) of the power cable (C) into the wall
socket.
INSTALLING THE V-MOUNT BATTERY*
(optional)
1. Slide the fully charged battery* (2 pcs of type NP-F750/
NP-F960) into the battery holder (5) from the side so that
the battery clicks into place.
2. To remove, slide the battery* out of the holder in the
opposite direction.
TURNING ON THE LED LIGHT
1. Establish the power supply for the device (insert battery or
connect power cable).
2. Press the power button (8) for approx. 1 second to turn the
device on or off.
Important: Disconnect the device from the power supply if it
is not going to be used for a long period of time!
BRIGHTNESS ADJUSTMENT
1. Press "DIMMER/COLOR".
2. If the "DIMMER" corresponding indicator lights bright, you
can adjust the brightness by turning the knob.
B
C
*not included