Bresser BR-S100B PRO Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt oświetleniowy Bresser BR-S100B PRO. Bresser BR-S100B PRO 13 stron. Led panel light
Drukuj stronę
➊
➌
➍
⓫
⓬
⓭
⓮
Fig. 1
DELIVERY CONTENT (FIG. 1)
LED Light (A), power cable (B), remote control (C)
PARTS OVERVIEW
Vents
➊
Channel selection buttons
➋
Battery holder
➌
Locking lever (tilt joint)
➍
LED display
➎
Indicators
➏
Adjustment knob
➐
DMX/2.4G button
➑
DIMMER/COLOR button
➒
DMX socket
➓
Power connection socket
⓫
Power knob
⓬
U-bracket
⓭
Fixing screw (tripod connection)
⓮
Tripod connection
⓯
POWER CABLE (B)
Euro plug
2-pins plug
REMOTE CONTROL (C)
LCD
Power button
– button
Menu button
+ button
Battery compartment
➋
➎
➏
⓯
ESTABLISHING THE POWER SUPPLY
1. Insert the 2-pins plug (17) of the power cable (B) into the
power connection socket (11) on the LED light.
2. Insert the Euro plug (16) of the power cable (B) into the wall socket.
INSTALLING A V-MOUNT BATTERY*
(optional)
1. Slide the fully charged battery* (1 pc of type SONY BP V)
into the battery holder (3) from the side so that the battery
clicks into place.
2. To remove, slide the battery* out of the holder in the
opposite direction.
TURNING ON THE LED LIGHT
1. Establish the power supply for the device (insert battery or
connect power cable).
2. Press the power knob (12) to power on the device.
3. Press the power knob (12) again to shut down the device.
BRIGHTNESS ADJUSTMENT
1. Press "DIMMER/COLOR" (8).
2. When the "DIMMER" corresponding indicator lights (2)
bright, you can adjust the brightness by turning the
adjustment knob (7).
COLOR TEMPERATURE ADJUSTMENT
1. Press "DIMMER/COLOR"(8).
2. When the "COLOR" corresponding indicator lights bright,
you can adjust the color temperature by turning the
adjustment knob (7).
SETTING A CHANNEL
1. Press the Channel selection buttons (5) to set the desired
channel (01-99).
➐
➑
➒
➓
C
B
*not included