BENDIX TIM G2 Podręcznik użytkownika - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Jednostka sterująca BENDIX TIM G2. BENDIX TIM G2 4 stron. Trailer information module
Drukuj stronę
a) Setting next service distance to
6,250 miles (mi)
Main Menu
Stored DTCs
Distance & Serv.
Operating Info
System Info
1x
+
Reset Trip
Srv Date
18-01-10
Srv Mi:
6240mi
Set Next Service
5x
+
Date Based
Distance Based
Exit
1x
+
Srv Mi:
0mi
Save & Exit
Exit
d) Installation test
Initial Menu
<Active DTCs>
ODO:
127mi
Load Rear: 58420lb
Inst. Test Missing
Scroll to "Inst. Test Missing"
+
Installation test
is missing! To
start it browse to:
Main Menu->
Scroll and follow
instructions on the
screen
Start Inst. Test
Install. Check:
Reserv. Press:
S-C Sensor:
SECURE Trailer
against movement!
During this test
all its brakes may
3x
BW2867 © 2011 Bendix Commercial Vehicle Systems LLC, a member of the Knorr‑Bremse Group. 10/11. All Rights Reserved.
*
Srv Mi:
0mi
Save & Exit
Exit
*
"
"
Indicates cursor buttons
and
are now used to change 'mi' values
2x
= 6250 mi
+
Srv Mi:
6250mi
Save & Exit
Exit
*
NOTE: "
" inactive, buttons
and
revert to normal function
1x
+
Next service
distance has been
succesfully set in
ECU.
END
all its brakes may
be released auto-
matically! Press
ENTER to confirm
2x
matically! Press
ENTER to confirm
you have secured
the Trailer.
= Confirm
Confirm that all
non connected
ports are plugged
then press ENTER.
= Confirm
Confirm that pneu-
matic connections
are secure, then
press ENTER.
= Confirm
EXAMPLES
b) Display current Diagnostic
Trouble Code (DTC) status
Main Menu
Stored DTCs:
Distance & Serv.
Operating Info
System Info
Overview of DTC
Active DTCs:
S-C O/C.
S-D O/C.
Module Error
1x
+
DTC Detail
S-C Open circuit or
Shorted to Battery
DTC:
Scroll
Occurrence count:
First detection:
Scroll
2008-03-15 19:43.44
Last detection:
2008-03-31 10:11.47
END
Confirm that
cables are securely
clipped, then
press ENTER.
= Confirm
Confirm that wheel
speed sensors have
been set, then
press ENTER.
= Confirm
Confirm that the
Truck's parking
brake is applied
then press ENTER.
= Confirm
Confirm that the
Trailer's parking
brake is NOT active
then press ENTER.
= Confirm
(if reservoir pressure > 6Bar)
c) Changing the language
default
System Info
ECU Info
TIM Info
Exit
Lang.: US English
Scr Saver: Load
Set LCD Contrast
Manufacturing Info
US English
N.Am. French
N.Am. Spanish
Exit
000D00
Langue: N.Am. French
Eco ecran Charger
4
Régl Contraste LCD
Info Fabricant
0mi
Info Fabricant
Test Affichage
Test Touche
0mi
Sortie
Overview of wheel
location, "Confirm"
Start Inst. Test
Install. Check:
Reserv. Press:
S-C Sensor:
2x
Accelerate selected
wheel to 3mph
Overview of wheel
location, "Confirm"
Install. Check:
Reserv. Press:
S-C Sensor:
S-D Sensor:
2x
Accelerate selected
wheel to 3mph
Main Menu
Scroll to "TIM Info"
+
1x
+
Scroll to "Sortie" (Exit)
END
Reserv. Press:
S-C Sensor:
S-D Sensor:
Demand Press:
Fully apply the brake
pedal, then release it
S-C Sensor:
S-D Sensor:
Demand Press:
Tilt Angle:
< 5
o
TEBS mounting angle
within tolorance
Installation test
has been success-
fully executed.
Please switch igni-
2x
fully executed.
Please switch igni-
tion OFF-ON to
memorize status.
Start Inst. Test
Install. Check:
Reserv. Press:
S-C Sensor:
END