BENDIX DOUBLE ANCHOR PIN CAM BRAKE Podręcznik opisu ogólnego - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik opisu ogólnego dla Części samochodowe BENDIX DOUBLE ANCHOR PIN CAM BRAKE. BENDIX DOUBLE ANCHOR PIN CAM BRAKE 12 stron. Double anchor pin cam brake
Drukuj stronę
SYMPTOM
1. Degraded brake
performance.
2. Slow brake
application.
3. Slow brake release.
4. Grabbing or pulling
FOUNDATION BRAKE TROUBLESHOOTING CHART
CAUSE
A. Too much push rod free travel.
B. Severely glazed or worn out linings.
C. Grease or oil on linings.
D. Worn, heat checked, cracked drums.
E. Push rod length too long.
F. Air chamber in wrong position in
G. Broken or bent parts.
H. Cam flipover, drum I.D. too large.
I.
Flat spots on cam or rollers.
A. Cam shaft bushings binding.
A. Binding cam shaft and bushings.
B. Weak or broken shoe return spring.
C. Flat spotted cam or rollers.
A. Grease, oil or dirt on lining.
B. Glazed linings.
C. Brake linings not a balanced set,
different friction codes, or lining brand.
D. Loose or broken linings.
E. Brake drum out-of-round.
F. Defective brake drum.
G. Clevis pin or cam shaft binding at one
or more wheels.
H. Defective slack adjuster.
I.
Uneven brake adjustment (side to side) I.
J.
Broken or bent parts.
K. Loose spider or drum mounting bolts.
L. Different air chamber size or slack
adjuster length (side to side).
REMEDY
A. Adjust brakes.
B. Deglaze linings or replace.
C. Replace linings.
D. Replace part.
E. Adjust device, shorten push rod
length.
F. Reposition.
G. Replace part.
H. Replace drum.
I.
Replace flat-spotted parts.
A. Clean and lubricate. Check for
seal leakage.
A. Clean and lubricate.
B. Replace part.
C. Replace flat-spotted parts.
A. Replace lining.
B. Deglaze lining or replace.
C. Replace linings.
D. Replace linings.
E. Turn, per manufacturer's
specifications.
F. Replace part.
G. Clean and lubricate.
H. Replace part.
Adjust brakes.
J. Replace part.
K. Retorque, per manufacturer's
specifications.
L. Use same size and materials on
all brakes.
9