BENDIX BDW 45 Instrukcja obsługi - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zmywarka BENDIX BDW 45. BENDIX BDW 45 16 stron. Dishwasher
Również dla BENDIX BDW 45: Instrukcja obsługi (16 strony)
Drukuj stronę
Adjusting the worktop
You can move the worktop forward or backward by
25 mm in order to align the machine with other kitchen units.
Simply unscrew the two rear retaining screws, move the top to
the required position and then retighten the screws.
Fitting under a counter
(kitchen worktop or sink)
By removing the machine's worktop, you can install it under a
close fitting sink unit or a pre-existing top, providing the
dimensions of the recess correspond to those shown in the
picture.
Proceed as follows:
- Remove the machine's worktop by unscrewing the two front
retaining screws, pull from the front and slide out the rear
slots, lifting the worktop.
Insert the machine after adjusting height and levelling with the
adjustable feet. When inserting the machine, ensure that the
water inlet and drain hoses are not kinked or squashed.
Technical specifications
Dimensions
Electrical connection
Motor rating during wash
Power of heating element
Overall power
Water supply pressure
Capacity
Width
Height with worktop
Height without worktop
Max depth
Max depth with open door
Voltage
Minimum
Maximum
6
45 cm
85 cm
82 cm
60 cm
115.9 cm
220/240 V - 50 Hz
200 W
1900 W
2100 W
50 kPa (0.5 bar)
800 kPa (8 bar)
8 place settings