aFe Power TA-4306B-R Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Części samochodowe aFe Power TA-4306B-R. aFe Power TA-4306B-R 16 stron. Stage-2 air intake

INSTALL

Figure G

Refer to Figure G for Steps 15-17

Step 15: Insert the Takeda air scoop though the housing opening, assure it snaps in to the grooves.

Step 16: Re-install the OE push pins to secure the Takeda air Scoop.

Step 17: Make sure all bolt and clamps are tight, installation is now complete. Thank you for

choosing Takeda.

NOTE: Retighten all connections after approximately 100-200 miles.

Place enclosed CARB EO sticker on or near the device on a smooth, clean surface.

EO identification label is required to pass the smog inspection.

Page 10