Airwell RC5 Podręcznik programowania i obsługi - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik programowania i obsługi dla Pilot zdalnego sterowania Airwell RC5. Airwell RC5 11 stron. For room air conditioner
Również dla Airwell RC5: Podręcznik (8 strony)
Drukuj stronę
TIMER OPERATION
Press TIMER select button (8) to activate the timed operation mode. Each
time the TIMER button (8) is pressed, one of the following four types of
operation modes will appear on the LCD display. The operation modes are
sequenced in the direction of arrow. TIMER Indicator on the air conditioner
will light up during TIMER operation.
Note: After power failure when the unit is in timer mode TIMER indicator will
be blinking and the unit will be automatically turned to stand-by mode and
the timer operation will be cancelled. To resume the timer wait 30 sec. before
reprograming. Follow the instructions above.
TIMER OPERATING MODES
I. TIMER ON
This mode enables you to set a start operating time
. Press the TIMER button (8) till the ON sign blinks.
Start time can be adjusted using up and down buttons
(9) and (10) respectively. Press SET button (13) to
activate the timer.
Example: Operation is restored at 10:30.
IV. CLEAR
Use this mode to cancel timer operation. Press
CLEAR button (14), timer operation will terminate
and the LCD display will be cleared for each timer
mode.
Note: If timer button (8) is selected and neither time
adjust, SET, or CLEAR buttons are pressed within
15 seconds, the timer operation will be cancelled
and the last set-up will be displayed.
Note: After pressing set button (13) the LCD will display the current time.
II. TIMER OFF
This mode enables you to set the stop time of
operation. Press the TIMER button (8) till the OFF
sign blinks. Time can be adjusted using up and down
buttons (9) and (10) respectively. Press SET button
(13) to activate the timer.
Example: Operation stops at 18:00
III. TIMER ON AND OFF
This mode enables you to set the start and stop time
of operation. Press the TIMER button (8) till the ON
sign blinks. By pressing again the OFF sign blinks.
Time can be adjusted by using the up and down
buttons (9) and (10), respectively. Press SET button
(13) to activate the timer. The LCD display will show
the current time.
Example: Operation is restored at 10:30 and stops
at 18:00
8