Bendix/King Skymap IIIC Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla GPS Bendix/King Skymap IIIC. Bendix/King Skymap IIIC 6 stron. Global positioning system
Również dla Bendix/King Skymap IIIC: Podręcznik (6 strony), Podręcznik pilota (14 strony)
Drukuj stronę
To change the navigation info displayed in the lower left corner:
B
1. Press the
button.
2. Use the right outer knob to move the cursor to the cyclic field in the lower
left corner.
E
3. Press
to change between the choices, which are:
• Groundspeed (figure 5),
17.6nm
SGJ
{>Leg
>117kt
APT VOR NDB
Figure 5
• Estimated Time En route (ETE) to the active waypoint (figure 6),
• Crosstrack correction (figure 7), or
• Magnetic Desired Track (DTK) (figure 8).
17.6nm
SGJ
{>Leg
> 1.2∆
APT VOR NDB
Figure 7
To scan through the active flight plan waypoints:
1. Pull out and turn the right inner knob (figure 9).
2. With desired waypoint displayed in scanning window, press
direct-to the selected waypoint.
17.6nm
SGJ
{>Leg
>117kt
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
SUA:on
OMN
GJ
VOR:off
%
APT:on
"
%
123° KJAX
Figure 9
-4-
17.6nm
SGJ
{>Leg
> 1:23
APT VOR NDB
Figure 6
17.6nm
SGJ
{>Leg
>
123
DTK
APT VOR NDB
Figure 8
D
to go
ORL
% %
KORL
SGJ