dymax T17384 Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Jednostka sterująca dymax T17384. dymax T17384 16 stron. Handheld needle valve

Model 400 Dispensing Valve User Guide

System Interconnect

Air

The Model 400 needle valve requires a Model 345 valve controller or a 2-position, 4-way

air solenoid valve to actuate the air section. The valve should be operated with clean,

dry air between 80-100 psi [5.5 - 7 bar]. One #10-32 threaded air port is located on the

valve. This port is used to open the valve when air pressure is applied and close the

valve when air pressure is relieved. A quick-connect air fitting is typically supplied with

the Model 400 to fit 0.16" [4 mm] tubing.

Fluid

The Model 400 needle valve requires a material reservoir or pressure tank to draw

material from. The material reservoir should be connected to the Model 400 valve

through the 1/8" [3.2 mm] NPT port located on the valve.

Figure 2. Valve Interconnect Diagram

Precision Air Regulator

(Recommended)

Valve Controller or

Solenoid Valve

(DVC-345 Shown)

Air Filter Regulator

with Dump Valve

(Recommended)

Air Supply

Model 400 Valve

Air In

Material In

Material Reservoir

(20 oz Cartridge

Reservoir Shown)