dymax BlueWave 200 Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt laboratoryjny dymax BlueWave 200. dymax BlueWave 200 16 stron. Handheld diaphragm valve
Również dla dymax BlueWave 200: Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony)

Model 200 Dispensing Valve User Guide

curable adhesives, cyanoacrylates, and anaerobic adhesives. This dispensing valve can

be used for a variety of applications including dot, bead, and potting applications.

Component Description

The Model 200 is comprised of two main sections — the Fluid Section and the Piston

and Lever Section, which are housed all in one Body. The Body of the Fluid Section is

constructed of Delrin® and contains a Teflon® Diaphragm. The Fluid Section and the

Piston and Lever Section are separated by a Diaphragm that is clamped in between the

two sections. The Piston and Lever Section is comprised of an aluminum Top-Cap that

houses a Spring-Loaded Piston. This Piston presses against the Diaphragm to keep the

Valve in the closed position. When the Lever is depressed, the Piston raises off the

Diaphragm allowing the Diaphragm to float upward to dispense fluid through the Body

to the Dispense Tip.

Wetted parts on the Model 200 are made of Delrin®, Teflon®, stainless steel, and

polyethylene.

Figure 1. Model 200 Internal Component Diagram