Dymo LabelManager Wireless PnP Skrócona instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Urządzenie do tworzenia etykiet Dymo LabelManager Wireless PnP. Dymo LabelManager Wireless PnP 13 stron. Dymo labelmanager wireless pnp technical datasheet
Również dla Dymo LabelManager Wireless PnP: Arkusz danych technicznych (7 strony), Przegląd (12 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (17 strony)

Drukuj stronę
Dymo LabelManager Wireless PnP Skrócona instrukcja obsługi

Cleaning the Label Maker

Your label maker is designed to give you long and trouble-free service, while
requiring very little maintenance. Clean your label maker from time to time to
keep it working properly. Clean the cutter blade each time you replace the
label cassette.
To clean the tape print head
Open the side cover of the label maker.
1
Remove the label cassette.
2
Use a small, soft brush or cotton swab to
3
wipe away paper dust and other stray
particles from the inside of the label
compartment.
Remove the cleaning tool from the inside
4
of the cover. See Figure 7.
Gently wipe the print head with the tool.
5
The print head is very delicate, so use care
when cleaning.
Replace the cleaning tool, insert the label
6
cassette, and close the side cover.
To clean the cutter blade
Open the side cover of the label maker.
1
Remove the label cassette.
2
Press the cutter button. See Figure 8.
3
The cutter blade will move into view.
Use a cotton swab and alcohol to clean both
4
sides of the cutter blade.
The cutter blade is extremely sharp.
CAUTION
Use caution when cleaning.
After cleaning the blade, release the cutter button
5
to return the blade to its home position.
Cleaning tool
Figure 7
Print head
Press and hold
Figure 8
7