GABOR TM-3770 Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Uchwyt TV GABOR TM-3770. GABOR TM-3770 16 stron.

ATTACH THE WALL PLATE TO THE WALL

Wood Stud Installation

1. Use a stud finder to

locate the studs in your

wall, and mark the

locations with a pencil.

Note: It's important to find

both edges of the stud, so

you can drill a pilot hole in

the center of the stud.

Installation Instructions

2. Place the wall mount over

your pencil marks. Use

the included leveler to

make sure the wall mount

is straight. Mark the

appropriate wall mount

holes with a pencil.

3. Use a

3/16 in. (4.5 mm)

drill holes

drill bit, and

approximately 2.2 in.

(55 mm) deep into

the studs.

4. Attach the wall mount

to the wall with screws

(I) and washers (K) until

mount is held in place, but

do not completely tighten

the screws.

Important! Do not use wall

anchors when installing the

wall mount onto wood studs.