Dymo LabelWriter DUO Skrócona instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Urządzenie do tworzenia etykiet Dymo LabelWriter DUO. Dymo LabelWriter DUO 6 stron. Dymo labelwriter printer quick start
Również dla Dymo LabelWriter DUO: Skrócona instrukcja obsługi (14 strony), Skrócona instrukcja obsługi (12 strony), Przegląd (2 strony), Podręcznik użytkownika (19 strony), Skrócona instrukcja obsługi (8 strony)

To connect using the serial port

Plug the serial cable into the serial port on the

bottom of the printer. See Figure 7.

Insert the power and serial cables into the cable

channel and set the printer down on your work

surface.

When prompted during the software installation

and while the printer is turned on, plug the

serial connector into the serial (COM) port on

your computer. See Figure 8.

The installation automatically continues when the

system detects the LabelWriter printer.

4. Loading Labels

Press the form-feed button to eject the labels that

protected the printer during shipment.

Open the top cover and remove the label spool.

Hold the spool spindle in your left hand and

place the label roll on the spindle so that the

labels feed from underneath.

Place the spool guide on the right side of the

spool and adjust it to fit snugly against the roll.

See Figure 9.

Insert the label spool into the slots in the

printer cover.

Serial

Connection

Cable

Channel

Figure 7

Serial Port

Figure 8

Figure 9

Power

"8,+